PDF Download: Technical Drawing with Engineering Graphics & Design in Practice: Definitions, Importance, and Applications

Download PDF: Technical Drawing with Engineering Graphics and Design in Practice_Definitions, Importance, and Applications

The eBook (which can be downloaded via the above link) discusses the following topics (in bold letters):

  • Definition of Engineering Graphics.
  • Definition of Graphical Engineering.
  • What Engineering Graphics and Design is all About
    • What is Engineering Design?
    • Application of Technical Drawing with Engineering Graphics in Engineering Design.
  • Basic Components of Engineering Graphics—the Code of Practice.
  • Importance of Engineering Graphics and Design.
  • Uses/Applications of Engineering Graphics and Design.

On the other hand, you can read the same information by visiting the following web pages of this site:

Definition of Engineering Graphics, and Graphical Engineering

Basic Components of Engineering Graphics—the Code of Practice

What Engineering Graphics and Design is all About

Importance, Uses/Applications of Engineering Graphics and Design

Definition & Types of Technical Drawing (PDF Download Available)

Thanks for reading.

 

Interested in buying world-class technical and engineering drawing eBooks? Please, read on.

Knowledge is power. The more you read, study, and absorb, the more you can greatly magnify your visualization process and become better. There is no limit.

For further reading and study of topics on technical and engineering drawings/graphics—which is essential for your education/future as an engineer/technologist and—we advise that you make a habit of reading good books.

It’s possible to get a good book from a friend or purchase it either from a local bookstore (offline) or online. In case you’d be interested in purchasing, we have six high-quality technical & engineering drawings/graphics books (eBooks/PDF books) for sale at cheap prices.

Continue scrolling down and you’ll come across their respective titles, number of pages, and lists of chapters. Each book is available for purchase at a cost of $5 (or 2,500 Naira) per book; if you wish to purchase all books, you’ll get a discount of $5 (2,500 Naira) and purchase 6 books for $25 (12,000 Naira) instead of $30 (15,000 Naira).

Note

For the past 3 years, until January 19, 2022, all the eBooks on this site were always available for free download (no payment). However, as from January 20, 2022, we introduced payments to be able to acquire, at least, little funds for the upkeep of our domain name and site maintenance for the benefit of present and future visitors who will read our articles on topics of their interest.

Instructions for payment

To purchase a copy or copies:

(1) Pay through any of the following 3 payment methods:

  • Send Bitcoin equivalent of USD to: 13jRM5DYmYSHvMraPB7c6JGhNk8dKzCVPg
  • Send Ethereum equivalent of USD to: 0xa571807E344D83797ebdFb01e3aFB3F7F43Da29B
  • Send USD ($) through WorldRemit, Remitly, or any other trustworthy platform/site to the following bank account:

Bank name: Guaranty Trust Bank (GTBank), Nigeria

Account name: Godwin Terhemba Ihagh

Account number: (Send Dollars to 0620810523; Naira to 0210490937)

Note: If you’d like to pay using a different payment option or another cryptocurrency that isn’t listed above, contact us through our email: godwinihagh@gmail.com or Whatsapp number: +2348033219907.

(2) After payment, take and send a screenshot(s) of the transaction(s) as evidence of payment to either our email: godwinihagh@gmail.com or Whatsapp number: +2348033219907.

(3) After confirming payment, we’ll provide you with access to the book(s) which is/are easy-to-read and contain(s) comprehensive coverage of technical and engineering drawing/drafting and design instructions that comply with present-day industry standards.

The titles of the books (arranged in decreasing order of priority [from 1 to 6]—based on our assessment) and their respective number of pages and titles of chapters are as follows:

1. Technical Graphics Communication, 4th Edition, by Gary R. Bertoline, Eric N. Wiebe, Nathan W. Hartman, William A. Ross (1335 pages), 2009

Chapter 1: Introduction to Graphics Communication, pg.5

Chapter 2: The Engineering Design Process, pg.27

Chapter 3: Design in Industry, pg.46

Chapter 4: The Role of Technical Graphics in Production, Automation, and Manufacturing Processes, pg.109

Chapter 5: Design & Visualization, pg.135

Chapter 6: Technical Drawing Tools, pg.187

Chapter 7: Sketching and Text, pg.237

Chapter 8: Engineering Geometry and Construction, pg.305

Chapter 9: Three-dimensional Modeling, pg.399

Chapter 10: Multiview Drawings, pg.488

Chapter 11: Axonometric and Oblique Drawings, pg.577

Chapter 12: Perspective Drawings, pg.631

Chapter 13: Auxiliary Views, pg.652

Chapter 14: Fundamentals of Descriptive Geometry, pg.691

Chapter 15: Intersections and Developments, pg.716

Chapter 16: Section Views, pg.759

Chapter 17: Dimensioning and Tolerancing Practices, pg.818

Chapter 18: Geometric Dimensioning and Tolerancing (GDT), pg.875

Chapter 19: Fastening Devices and Methods, pg.908

Chapter 20: Working Drawings, pg.949

Chapter 21: Technical Data Presentation, pg.1064

Chapter 22: Mechanisms: Gears, Cams, Bearings, and Linkages, pg.1105

Chapter 23: Electronic Drawings, pg.1146

Chapter 24: Piping Drawings, pg.1163

Chapter 25: Welding Drawings, pg.1187

2. Technical Drawing with Engineering Graphics, 15th Edition, by Frederick E. Giesecke, Shawna Lockhart, Marla Goodman, Cindy M. Johnson (1077 pages), 2016

Chapter 1: The World-wide Language for Graphic Design, pg.2

Chapter 2: Layouts and Lettering, pg.30

Chapter 3: Visualization and Sketching, pg.62

Chapter 4: Geometry for Modeling and Design, pg.124

Chapter 5: Modeling and Design, pg.170

Chapter 6: Orthographic Projection, pg.234

Chapter 7: 2D Drawing Representation, pg.284

Chapter 8: Section Views, pg.326

Chapter 9: Auxiliary Views, pg.362

Chapter 10: Modeling for Manufacture, pg.414

Chapter 11: Dimensioning, pg.502

Chapter 12: Tolerancing, pg.546

Chapter 13: Threads, Fasteners, and Springs, pg.592

Chapter 14: Working Drawings, pg.636

Chapter 15: Drawing Control and Data Management, pg.710

Chapter 16: Gears and Cams, pg.730

Chapter 17: Electronic Diagrams, pg.756

Chapter 18: Structural Drawing, pg.780

Chapter 19: Landform Drawings, pg.808

Chapter 20: Piping Drawings, pg.828

Chapter 21: Welding Representation, pg.846

Chapter 22: Axonometric Projection, pg.W870

Chapter 23: Perspective Drawings, pg.W900

3. Engineering Drawing & Design, 6th Edition, by David A. Madsen and David P. Madsen (1104 pages), 2017

Chapter 1: Introduction to Engineering Drawing and Design, pg.2

Chapter 2: Drafting Equipment, Media, and Reproduction Methods, pg.39

Chapter 3: Computer-Aided Design and Drafting (CADD), pg.61

Chapter 4: Manufacturing Materials and Processes, pg.109

Chapter 5: Sketching Applications, pg.162

Chapter 6: Lines and Lettering, pg.181

Chapter 7: Drafting Geometry, pg.205

Chapter 8: Multiviews, pg.228

Chapter 9: Auxiliary Views, pg.259

Chapter 10: Dimensioning and Tolerancing, pg.277

Chapter 11: Fasteners and Springs, pg. 347

Chapter 12: Sections, Revolutions, and Conventional Breaks, pg.387

Chapter 13: Geometric Dimensioning and Tolerancing, pg.409

Chapter 14: Pictorial Drawings and Technical Illustrations, pg.495

Chapter 15: Working Drawings, pg.526

Chapter 16: Mechanisms: Linkages, Cams, Gears, and Bearings, pg.561

Chapter 17: Belt and Chain Drives, pg.601

Chapter 18: Welding Processes and Representations, pg.617

Chapter 19: Precision Sheet Metal Drafting, pg.644

Chapter 20: Electrical and Electronic Drafting, pg.669

Chapter 21: Industrial Process Piping, pg.717

Chapter 22: Structural Drafting, pg.773

Chapter 23: Heating, Ventilating, and Air-conditioning (HVAC) and Pattern Development, pg.847

Chapter 24: Civil Drafting, pg.899

Chapter 25: The Engineering Design Process, pg.950

Engineering Drawing and Design Student Companion Website, pg.973

4. Engineering Design and Graphics with SolidWorks by James D. Bethune (829 pages), 2017

Chapter 1: Getting Started, pg.1

Chapter 2: Sketch Entities and Tools, pg.41

Chapter 3: Features, pg.123

Chapter 4: Orthographic Views, pg.225

Chapter 5: Assemblies, pg.299

Chapter 6: Threads and Fasteners, pg.375

Chapter 7: Dimensioning, pg.439

Chapter 8: Tolerancing, pg.509

Chapter 9: Bearings and Fit Tolerances, pg.605

Chapter 10: Gears, pg.639

Chapter 11: Belts and Pulleys, pg.699

Chapter 12: Cams, pg.725

Chapter 13: Projects, after pg.774

5. Interpreting Engineering Drawings, 8th Edition, by Theodore J. Branoff (530 pages), 2016

Unit 1: Introduction: Line Types and Sketching, pg.1

Unit 2: Lettering and Title Blocks, pg.11

Unit 3: Basic Geometry: Circles and Arcs, pg.15

Unit 4: Working Drawings and Projection Theory, pg.22

Unit 5: Introduction to Dimensioning, pg.39

Unit 6: Normal, Inclined, and Oblique Surfaces, pg.52

Unit 7: Pictorial Sketching, pg.67

Unit 8: Machining Symbols and Revision Blocks, pg.78

Unit 9: Chamfers, Undercuts, Tapers, and Knurls, pg.86

Unit 10: Sectional Views, pg.91

Unit 11: One- and Two-View Drawings, pg.110

Unit 12: Surface Texture, pg.117

Unit 13: Introduction to Conventional Tolerancing, pg.130

Unit 14: Inch Fits, pg.142

Unit 15: Metric Fits, pg.150

Unit 16: Threads and Fasteners, pg.161

Unit 17: Auxiliary Views, pg.181

Unit 18: Development Drawings, pg.190

Unit 19: Selection and Arrangement of Views, pg.196

Unit 20: Piping Drawings, pg.202

Unit 21: Bearings, pg.214

Unit 22: Manufacturing Materials, pg.220

Unit 23: Casting Processes, pg.232

Unit 24: Violating True Projection: Conventional Practices, pg.249

Unit 25: Pin Fasteners, pg.264

Unit 26: Drawings for Numerical Control, pg. 274

Unit 27: Assembly Drawings, pg.280

Unit 28: Structural Steel, pg.289

Unit 29: Welding Drawings, pg.294

Unit 30: Groove Welds, pg.305

Unit 31: Other Basic Welds, pg.315

Unit 32: Spur Gears, pg.328

Unit 33: Bevel Gears and Gear Trains, pg.337

Unit 34: Cams, pg.347

Unit 35: Bearings and Clutches, pg.353

Unit 36: Ratchet Wheels, pg.362

Unit 37: Introduction to Geometric Dimensioning and Tolerancing, pg.368

Unit 38: Features and Material Condition Modifiers, pg.380

Unit 39: Form Tolerances, pg.394

Unit 40: The Datum Reference Frame, pg.402

Unit 41: Orientation Tolerances, pg.415

Unit 42: Datum Targets, pg.432

Unit 43: Position Tolerances, pg.440

Unit 44: Profile Tolerances, pg.461

Unit 45: Runout Tolerances, pg.469

6. Architectural Graphic Standards Student Edition, 12th Edition, by The American Institute of Architects (689 pages), 2017

Chapter 1: Functional Planning, pg.3

Chapter 2: Environment, pg.31

Chapter 3: Resilience in Buildings. Pg.53

Chapter 4: Architectural Construction Documentation, pg.77

Chapter 5: Concrete, pg.93

Chapter 6: Masonry, pg.107

Chapter 7: Metals, pg.125

Chapter 8: Wood, pg.141

Chapter 9: Glass, pg.165

Chapter 10: Element A: Substructure, pg.176

Chapter 11: Element B: Shell, pg.203

Chapter 12: Element C: Interiors, pg.363

Chapter 13: Element D: Services, pg.427

Chapter 14: Element E: Equipment and Furnishings, pg.517

Chapter 15: Element F: Special Construction, pg.565

Chapter 16: Element G: Sitework, pg.581

Appendices, pg.627

 

Thank you.

 

6 comments

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.